☑️Resources
Vortex Github
☑️QMK toolbox
Github (Software download required)
☑️ VIA
Github (Software download required)
VIA Official Website (Web version available for direct use)
VIA (WB version/V3.0.0)
VIA 1.3.1 For Windows / VIA 1.3.1 For MacOS
☑️ Vial
Vial Official Website (Web version available for direct use or download the software)
Bin files (QMK firmware) 
⌨️ 𝟲𝟬%
📌M0110 QMK Version
*Please use the Beta version for QMK tool box
➮ M0110 QMK ANSI & ISO (7u/HHKB layout) bin file/firmware
➮ M0110 QMK ANSI & ISO (6.25u/61-key standard layout) binfile/firmware
⌨️ 𝐅𝐑𝐋 & 𝐅𝐑𝐋 𝟏𝟖𝟎𝟎
📌M0110A & M0110A-1800
*Please use the Beta version for QMK tool box
M0110A and M0110A-1800 share the same bin file and json file If you want to change the configuration. (1800/US/ ISO /split Bksp and split left Shift), please switch the configuration through the second icon: "layout" in the lower left of the VIA interface
➮ M0110A & M0110A-1800 5 layer bin file/ firmware
➮ M0110A & M0110A-1800 16 layer bin file/ firmware
JSON files 
⌨️ 4𝟬%
📌 Core Plus (VIA version: 3.0)
⌨️ 𝟲𝟬%
📌M0110 QMK version (VIA version: 3.0)
All of the M0110 docs are designed for V3.
Please ensure that do not activate the "Use V2 definitions" option while sideloading the files.
* If using the WB version of VIA, there is no need to load JSON files
➮ M0110 QMK ANSI & ISO (7u/HHKB layout) json file
➮ M0110 QMK ANSI & ISO (6.25u/61-key standard layout) json file
⌨️ 𝟲𝟱%
📌PC66 QMK version (VIA version: 1.3.1)
📌Hellcat DIY KIT (VIA version: 1.3.1)
Latest firmware release notes - 2024.06.05 :
Fixed the issue of not be able to control the light settings through VIA (ANSI layout only)
➮ ANSI (latest json file)
⌨️ 𝟴𝟬%
📌Model M SSK KIT (VIA version: 1.3.1)
➮ ANSI+ISO (6.25/ 7) json file
📌Multix TKL VIA (VIA version: 3.0)
➮ ANSI
➮ ISO
⌨️ 𝐅𝐑𝐋 & 𝐅𝐑𝐋 𝟏𝟖𝟎𝟎
📌M0110A & M0110A-1800 (VIA version: 3.0)
➮ M0110A & M0110A-1800 ANSI & ISO json file
⌨️ 100%
📌 Multix 104 VIA (VIA version: 3.0)
➮ ANSI
➮ ISO
VIA Firmware
⌨️ 100%
Latest firmware release notes - 2024.10.23 :
Optimized battery usage and comsumption
Vial uf2 files (firmware) 
▎uf2 operation:
Both of the methods below will work:
- Press "Fn+Tab" while the keyboard is connected
- In a disconnected state, press and hold "ESC", then connect the cable. Once the computer displays the connection, disconnect it again and re-establishthe connection.
A USB drive will show on your device, and you can copy /drop the uf2 files into it directly.
📌M0110 QMK version
#As M0110 QMK is certified based on the V3 protocol, Vial protocol has not been updated and is currently not supported.
Once Vial is available, we will provide relevant documentations.
📌Hellcat
Latest firmware release notes - 2024.06.05 :
Fixed the issue of not be able to control the light settings through Vial (ANSI layout only)
Before dragging/copying the latest file to the device , please reset the pcb first.
In a disconnected state, press and hold "ESC", then connect the cable. Once the computer displays the connection, disconnect it again and re-establishthe connection.
A USB drive will show on your device, and you can copy /drop the new uf2 files into it directly.
➮ ANSI (latest json file)
📌PC66 QMK version
➮ Uf2 file
📌Model M SSK
➮ ANSI 6.25 (WK) uf2 file (firmware)
➮ ANSI 7 (WKL) uf2 file (firmware)
➮ ISO 6.25 (WK) uf2 file (firmware)
➮ ISO 7 (WKL) uf2 file (firmware)
➮ ANSI+ISO (6.25/ 7) solderable uf2 file (firmware)